China Hot selling Zd Protection Grade IP65 High Precision 78mm Zdr Series Planetary Gearbox wholesaler

Merchandise Description

ZD Protection Grade IP65 Large Precision 78mm ZDR Series Planetary Gearbox

Product Description

ZDR sequence planetary gearbox has adopted helical equipment style, so the meshing of gears can be smoother. This collection has a double-supported and sealed structure, simpler to set up for customers. It is broadly used in linear manipulators, packaging equipment, assembly lines and etc. The optimum backlash of the ZDR collection is less than 5 arc.min and the reduction ratio covers 3~eighty one.

The Product Advantages of Planetary Gearbox:

1.Versatile structure design and style, in line with various doing work problems.
2.Ring gear processing technologies: Making use of inner equipment slotting equipment and hobbing device the precision of ring equipment soon after processing can reach GB7.
three.Hardened gear secondary scraping engineering: secondary high-velocity dry slicing of equipment gets rid of gear deformation caused by warmth remedy. Equipment accuracy can get to GB6.
4.Dependable backlash screening.

How to Go through:
seventy eight ZDR twenty ( ) (S) – 750 T1 ( )
a b c d e f g h

a Frame Dimensions 78 =78mm
b Series code:ZDR Indirect tooth precision
c Reduction Ratio Solitary Stage: 3,4,5,6,7,8,9,ten
Two Stages: fifteen,twenty,25,35,45,81.
d Backlash Single Phase: 8arc.min
Two Stages: 12arc.min
e Enter shaft variety S:General locking(Omission)(irrespective no matter whether the motor with keyway can use it. But D Reduce cannot use)
S1:Locking with locking ring(irrespective no matter whether the motor with keyway can use it. But D Cut cannot use)
S2:Locking with keyway (enter shaft with essential)
K:With keyway
A:0ther sort (you should speak to with us)
f Applicable servo motor electricity (W),Make sure you speak to us for specific electrical power
g Please contact us for the mouting type of the flang
h Please make contact with us for the model of servo motor

Spesifications & Information

When enter velocity is 3000rpm

Solution NO. Reduction Ratio Motor Output Shaft Pace (rpm) Common Output Torque (N.m) Instantaneous max.Output Torque (N.m) Permissible Radial Load (N) Permissible Axial Load (N) Inner Minute Ohnertia Of Input Shaftconversion (x10-4 kg.m2) Perrmissible Output Torque (N.m) Instantaneous Max. Permissible Output Torque (N.m)
78ZDR 3 750 1000 six.37 19.3 784 392 .913 6.86 20.6
5 400 600 5.39 sixteen.2 980 490 .363 6.57 19.seven
750 ten.7 32.one .713 11.5 34.3
9 two hundred 333 three.72 11.three 1180 588 0.275 9.70 29.2
four hundred 9.51 28.5

Note1) The moment of enter shaft conversion is only acquired from the reducer, so it does not consist of second of inertia of the motor.
Note2) The max. input pace is 5000rpm. Typically set to 3000rpm or significantly less.
Note3) The permissble radial load is indicated on the centre of the output shaft.
Note4) All values are inside the variety corresponding to helical gear.

When input pace is 3000rpm

Item NO. Reduction Ratio Motor Output Shaft Speed (rpm) Regular Output Torque (N.m) Instantaneous max.Output Torque (N.m) Permissible Radial Load (N) Permissible Axial Load (N) Inner Moment Ohnertia Of Enter Shaftconversion (x10-4 kg.m2) Perrmissible Output Torque (N.m) Instantaneous Max. Permissible Output Torque (N.m)
78ZDR 15 two hundred 200 6.27 18.eight 1470 735 0.300 16.2 48.six
four hundred fifteen.8 forty seven.5
20 two hundred 150 8.sixty nine 26.1 1570 785 0.294 21.one 63.3
four hundred 21.one sixty three.three
25 200 120 eleven.1 33.3 1670 833 0.288 21.seven 64.nine
four hundred 26.four seventy nine.two 26.4 79.2
35 100 85 seven.24 21.7 1670 833 0.065 13.nine 41.7
two hundred fifteen.5 forty six.6 0.262 15.five 46.six
45 50 66 3.86 eleven.6 1670 833 0.5715 9.fifty 28.six
100 9.31 28.
81 50 37 7.02 twenty.8 1670 833 0.571 9.70 29.2

Note1) The moment of enter shaft conversion is only received from the reducer, so it does not consist of second of inertia of the motor.
Note2) The max, input velocity is 5000rpm. Generally set to 3000rpm or considerably less.
Note3) The permissble radial load is indicated on the heart of the output shaft.
Note4) All values are inside the selection corresponding to helical equipment.

When input velocity is 2000rpm
 

Product NO. Reduction Ratio Motor Output Shaft Velocity (rpm) Normal Output Torque (N.m) Instantaneous max.Output Torque (N.m) Permissible Radial Load (N) Permissible Axial Load (N) Interior Moment Ohnertia Of Enter Shaftconversion (x10-4 kg.m2) Perrmissible Output Torque (N.m) Instantaneous Max. Permissible Output Torque (N.m)
78ZDR 3 four hundred 666 5.01 15. 900 450 .913 6.86 20.six
5 two hundred 400 3.82 eleven.five 1120 560 .363 6.57 19.7
four hundred 8.35 twenty five.1 .713 11.five 34.three
9 one hundred 222 two.35 7.04 1340 670 0.275 9.70 29.two
200 six.sixty four 19.9
15 one hundred 133 3.ninety one 11.7 1670 833 0.three hundred 16.two 48.six
two hundred eleven.one 33.2
20 100 100 five.73 17.two 1790 895 0.294 21.1 63.three
two hundred fourteen.eight forty four.four
25 100 80. seven.16 21.five 1670 833 0.288 21.seven 64.9
two hundred 18.5 fifty five.four
35 fifty 57. four.forty three thirteen.3 1900 950 0.262 15.5 46.six
a hundred twelve.seven 38.one
45 50 44.four five.eighty seventeen.four 1670 833 0.5715 9.fifty 28.6
81 fifty 24.six 9.70 29.2 1670 833 0.5710 9.70 29.2

Note1) The minute of enter shaft conversion is only acquired from the reducer, so it does not include moment of inertia of the motor.
Note2) The permissble radial load is indicated on the center of the output shaft.
Note3) All values are within the selection corresponding to helical gear.

Dimensions (Device: mm):

 

Solution NO. Reduction Ratio Motor Total Length L Output Shaft Flange
Panasonic- manufactured
MSMA
Yaskawa-created SGMASH SGMSH Mitsubishi-made HC-KFS
HC-RFS
LR S Q QM QM W×U T D LB LE LA LZ X
78ZDR 45,eighty one fifty 142 50 19 30 26 M5(depth)20 6×21.5 6 80 70 3 90 M6 20
35 one hundred 150
forty five 100 142
9 two hundred 139.five
15,20,25,35 200 150
five,nine four hundred 139.5
15,twenty,25 four hundred 150
three,5 750 143.five

Note1) Please inquire to us if motor product isn’t really regular (Matching motor listing). (The flange dimension might be diverse if motor assension is different.)
Note2) Rotation of the output shaft is in the same route as that of motor input.
Note3) All values are in the assortment corresponding to helical gear.
 

Mechanism

Double support mechanism

1.The planetary gear is put in the center of the output shaft.
two.The output shaft bearing is positioned at each ends of the planetary gear.
three.Separate sunshine gear and coupling.

Compact output shaft system

It adopts the style of output shaft integrated technique, compact composition, higher rigidity, and it can endure big affect. Place the input CZPT and the sunshine gear at the centre of the output shaft to enhance the concentricity of the components, therefore successfully managing the equipment clearance and strengthening the backlash of the complete gearbox.

 

Framework

Total needle composition

The interior bearing of the planetary equipment adopts a total-needle design, the interior hole is manufactured by a grinding process, the area hardness is HRC60, and the cylindricity is considerably less than .003mm.

Ring gear framework

The integral construction of the ring gear and the output flange improves its rigidity and reduces misassembly.

 

Other Design Kind of ZDR Collection

More products,remember to simply click right here…

Business Profile

 

Delivery

Our Solutions

one.Upkeep time & Warranty: one yr soon after leaving factory.

two.Other support: Like modeling selection guide, set up information, and issue shooting guide, and so forth.

FAQ

Q: What’re your primary goods?
A: We at present create Brushed DC Motors, Brushed DC Gear Motors, Planetary DC Gear Motors, Brushless DC Motors, AC Motors, Higher Precision Planetary Gearbox and Precision Cycloidal Gearbox and so on.. You can check the specifications for earlier mentioned motors on our internet site and you can electronic mail us to advise necessary motors for every your specification way too.

Q: How to pick a suitable motor or gearbox?
A:If you have motor photos or drawings to display us, or you have thorough specifications, these kinds of as, voltage, pace, torque, motor size, operating method of the motor, needed lifetime and sounds level and so forth, you should do not hesitate to permit us know, then we can suggest ideal motor for each your ask for accordingly.

Q: Do you have a customized provider for your common motors or gearboxes?
A: Indeed, we can personalize for each your request for the voltage, pace, torque and shaft dimensions/shape. If you need further wires/cables soldered on the terminal or need to have to add connectors, or capacitors or EMC we can make it too.

Q: Do you have an specific layout service for motors?
A: Sure, we would like to style motors individually for our buyers, but some sort of molds are necessory to be developped which might need to have actual expense and design charging.

Q: What’s your lead time?
A: Normally talking, our regular normal merchandise will want 15-30days, a little bit for a longer time for custom-made products. But we are very flexible on the direct time, it will count on the specific orders.

 

These compact, light-weight, reduced backlash inline equipment reducers ended up originally created for encoder applications. They are also suitable for many other push programs. Encoder equipment reducers have a very lower minute of inertia at the shaft input and are rated for input speeds up to 3000 rpm. Two body dimensions are accessible with equipment ratios from 4.ninety six:1 to 3600:1. Our encoder gearbox sync pads are offered from inventory.
Planetary gearboxes are utilised in different situations in which substantial efficiency and substantial reduction ratio are required in a little area. Showcasing large precision and substantial torque-to-quantity ratio, it is excellent for torque enhance, deceleration, specific positioning and management of regenerative machinery. To make certain that the chosen planetary gearbox is the very best suit for your application, it is important to contemplate parameters this sort of as torque, backlash and gear ratios when selecting a planetary gearbox.

China Hot selling Zd Protection Grade IP65 High Precision 78mm Zdr Series Planetary Gearbox     wholesaler