Category Archives: gearbox

China Best Sales High Quality R Series RF77 Gear Box air compressor portable

High-Quality R Series RF77 Gear Box Air Compressor Portable

If you are looking for a high-quality air compressor, the R Series RF77 Gear Box air compressor is an ideal choice. The R Series reducers are designed and manufactured based on a modular combination system. With a variety of motor combinations, installation forms, and structural schemes, the R Series RF77 offers superior performance. This air compressor is made with reinforced high rigid cast iron box and hardened gear made of high-quality alloy steel. Moreover, its surface is carburized, quenched and hardened and the gear is finely ground to provide a stable transmission, low noise, and large bearing capacity. Not only does it have low temperature rise, but it also boasts a long service life, making it an excellent investment in the long run.

Features

  • Small offset output
  • Compact structure
  • Maximum use of box space
  • Use of integral casting box
  • Good stiffness, which improves the strength of the shaft and bearing life

Technical Parameters

  • Coaxial coaxial output
  • Power: 0.12KW~160KW
  • Torque: 1.4N · m ~ 23200N · m
  • Output speed: 0.06 ~ 1090r/min
  • Reduction ratio: secondary 5~24.8, tertiary 27.2~264, R/R combination up to 18125
  • Average efficiency: Class II 96%, Class III 94%, R/R combination 85%
  • The R series specially designed for mixing can bear large axial and radial forces

Installation Type and Output Mode

The R Series RF77 air compressor offers a bottom-seated type and large and small flange type installation with CHINAMFG shaft output. You can use direct motor, shaft input, and connecting flange input as your input mode.

Model Example

The model example of the R Series RF77 Gear Box air compressor is R17-Y4-4P-32.40-M1-0°. R stands for the series code, F stands for the shaft extension flange installation, 17 stands for machine model, Y stands for three-phase AC asynchronous motor, 4 stands for motor power, 4P stands for motor stage, 32.40 stands for transmission ratio, M1 stands for installation type, and 0° stands for junction box position (0° – 270°).

Basic Model of R Series Reducer

The basic model of R series reducer includes R17, R27, R37, R47, R57, R67, R77, R87, R97, R107, R137, R147, R167, RF17, RF27, RF37, RF47, RF57, RF67, RF77, RF87, RF97, RF107, RF137, RF147, RF167, RX37, RX57, RX67, RX77, RX87, RX97, RX107, RX127, RX157, RXF37, RXF57, RXF67, RXF77, RXF87, RXF97, RXF107, RXF127, and RXF157.

Other Product Businesses

Our company mainly supplies various products for industrial use, such as agricultural gearboxes, power output shafts, sprockets, fluid couplings, worm gear reducers, gears and racks, roller chains, pulleys, planetary gearboxes, timing pulleys, bushings, etc. We offer high-quality products at preferential prices and considerate services. Customers are welcome to customize drawings and samples.

FAQs

Q: What is the material used to make the R Series RF77 Gear Box air compressor?

A: The R Series RF77 air compressor is made with reinforced high rigid cast iron box and hardened gear made of high-quality alloy steel.

Q: What are the input modes for the R Series RF77 air compressor?

A: You can use direct motor, shaft input, and connecting flange input as your input mode.

Q: What is the reduction ratio of the R Series RF77 air compressor?

A: The reduction ratio of the R Series RF77 air compressor is secondary 5~24.8, tertiary 27.2~264, R/R combination up to 18125.

Q: What is the average efficiency of the R Series RF77 air compressor?

A: The average efficiency of the R Series RF77 air compressor is Class II 96%, Class III 94%, R/R combination 85%.

Q: What is the installation type and output mode of the R Series RF77 air compressor?

A: The R Series RF77 air compressor offers a bottom-seated type and large and small flange type installation with CHINAMFG shaft output.

All the content of this page is from the Internet. The content is only for reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks of the content. Our products are only suitable for after-sales replacement parts and not original spare parts. Our replacement parts can be perfectly adapted to the original spare parts. If you need to buy original spare parts, please contact the original factory to buy.

Introduction

Gearbox, also known as transmission, is an essential component that plays a significant role in transmitting power from the engine to the wheels in a vehicle. The performance characteristics of the gearbox are as follows:

1. Transmission Efficiency: The gearbox has high transmission efficiency, which can ensure that the engine’s power is transmitted to the wheels in a more efficient way.

2. Torque Multiplier: The gearbox can also act as a torque multiplier, which can increase the torque output of the engine to the wheels.

3. Gear Ratio: The gearbox can change the gear ratio, which can provide a wide range of speeds for the vehicle.

Types and Characteristics of Gearbox

There are several types of gearbox, including manual, automatic, continuously variable, and dual-clutch gearbox. Each type has its unique characteristics that suit different driving conditions.

1. Manual Gearbox: This type of gearbox requires the driver to change the gear manually. It is simple, reliable, and cost-effective, making it popular in many vehicles.

2. Automatic Gearbox: This type of gearbox can change gears automatically, making it more convenient for drivers. It is also suitable for reducing fuel consumption and improving driving comfort.

3. Continuously Variable Gearbox: This type of gearbox can continuously change the gear ratio, making it more fuel-efficient and smoother in operation.

4. Dual-Clutch Gearbox: This type of gearbox has two clutches, which can provide quick gear changes and improve driving dynamics.

Advantages of Gearbox Made of Different Materials

The gearbox can be made of various materials, including aluminum alloy, cast iron, steel, and magnesium alloy. Each material has its advantages and disadvantages.

1. Aluminum Alloy: This material is lightweight, which can reduce the overall weight of the vehicle and improve fuel efficiency.

2. Cast Iron: This material is durable and can withstand high loads, making it suitable for heavy-duty applications.

3. Steel: This material is strong and can resist wear and tear, making it suitable for high-speed applications.

4. Magnesium Alloy: This material is lightweight and has good heat dissipation, making it suitable for high-performance applications.

Application of Gearbox

The gearbox is widely used in various industries, including the automotive industry, industrial machinery, agricultural equipment, wind turbines, marine applications, and many others. Its use reflects its value and importance in various fields.

Future Development Trends and Opportunities

The gearbox industry is continuously evolving, and there are many development trends and opportunities in the market. Some of these trends include:

1. Lightweight and Compact Design: The demand for lightweight and compact gearbox design is growing due to the need for more fuel-efficient vehicles.

2. Electrification: As more vehicles become electrified, there is a growing demand for electric gearbox systems that can handle higher torque loads.

3. Advanced Materials: The use of advanced materials, such as carbon fiber, can improve the strength and durability of the gearbox.

How to Choose a Suitable Gearbox

Choosing a suitable gearbox requires consideration of several factors, including load requirements, ratio selection, type of gearbox, environmental factors, maintenance, and durability.

1. Load Requirements: The gearbox should be selected based on the load requirements of the application. This includes the weight of the vehicle, the torque output of the engine, and the maximum speed of the vehicle.

2. Ratio Selection: The gearbox should be selected based on the desired gear ratio. This includes the number of gears and the gear ratios of each gear.

3. Type of Gearbox: The type of gearbox should be selected based on the driving conditions and the vehicle’s purpose.

4. Environmental Factors: The gearbox should be selected based on the environmental factors, such as temperature, humidity, and vibration.

5. Maintenance and Durability: The gearbox should be selected based on its maintenance requirements and durability.

Conclusion

In conclusion, the gearbox is an essential component in various industries, and its performance characteristics, types, materials, and applications make it a vital part of many vehicles and machines. The future development trends and opportunities in the gearbox industry are promising, and choosing a suitable gearbox requires careful consideration of several factors.

China Standard High Torque Straight Transmission Planetary Gearbox for Machining Equipment small air compressor

China Standard High Torque Straight Transmission Planetary Gearbox for Machining Equipment Small Air Compressor

The China Standard High Torque Straight Transmission Planetary Gearbox is a powerful solution for heavy-duty drive problems in industrial applications. This gearbox has a ratio range of 8.1-191 and a permit torque range of up to 50000 N.m, making it an ideal choice for machining equipment and small air compressors. The gearbox has a straight 3 stage planetary design and is available in foot-mounted, flange-mounted, and shaft-mounted configurations. The output speed ranges from 0.3~205 r/min, and it has transmissible mechanical power up to 450 kW.

Technical Data

The China Standard High Torque Straight Transmission Planetary Gearbox has the following technical data:

  • Ratio range: 8.1-191
  • Input power: 0.12-270 KW
  • Permit torque range: ≤ 50000 N. M
  • Output speed: 0.3~205 r/min
  • Structure: Foot-mounted, flange-mounted, shaft-mounted

The gearbox is highly versatile due to several options for mounting, output shaft, and motor interface. It has overloading bearing fixed to the output shaft, ensuring a reliable and safe service life of over 200 000 operational hours.

How To Select a Complete CHINAMFG Planetary Gearbox

The complete CHINAMFG Planetary Gearbox is made up of four parts: The input component, gear reductions, output component, and fittings. There are several options available for each part, providing customers with the ability to customize their gearbox to meet their specific requirements.

Our Services

Our company mainly supplies various products for industrial use, such as agricultural gearboxes, power output shafts, sprockets, fluid couplings, worm gear reducers, gears and racks, Roller chains, pulleys, planetary gearboxes, timing pulleys, bushings, etc. We offer high-quality products, preferential prices, and considerate services. Customers are welcome to customize drawings and samples.

FAQs

Q: What is the permit torque range for the China Standard High Torque Straight Transmission Planetary Gearbox?

A: The permit torque range is ≤ 50000 N. M.

Q: What is the transmissible mechanical power of the gearbox?

A: The gearbox has transmissible mechanical power up to 450 kW.

Q: What are the available output configurations?

A: The available output configurations include foot and flange mounted, output shaft with key, spline, spline hollow, and hollow with shrink disc.

Q: What type of hydraulic motors can be used with the gearbox?

A: Flanged axial piston hydraulic motors and hydraulic orbit motors can be used with the gearbox.

Q: What certifications does the product have?

A: The product is DNV-ISO9001: 2008, SGS, CE certified, and has new product patents.

All the content of this page is from the Internet. The content is only for reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks of the content. Our products are only suitable for after-sales replacement parts and not original spare parts. Our replacement parts can be perfectly adapted to the original spare parts. If you need to buy original spare parts, please contact the original factory to buy.

Introduction

Gearbox, also known as transmission, is an essential component that plays a significant role in transmitting power from the engine to the wheels in a vehicle. The performance characteristics of the gearbox are as follows:

1. Transmission Efficiency: The gearbox has high transmission efficiency, which can ensure that the engine’s power is transmitted to the wheels in a more efficient way.

2. Torque Multiplier: The gearbox can also act as a torque multiplier, which can increase the torque output of the engine to the wheels.

3. Gear Ratio: The gearbox can change the gear ratio, which can provide a wide range of speeds for the vehicle.

Types and Characteristics of Gearbox

There are several types of gearbox, including manual, automatic, continuously variable, and dual-clutch gearbox. Each type has its unique characteristics that suit different driving conditions.

1. Manual Gearbox: This type of gearbox requires the driver to change the gear manually. It is simple, reliable, and cost-effective, making it popular in many vehicles.

2. Automatic Gearbox: This type of gearbox can change gears automatically, making it more convenient for drivers. It is also suitable for reducing fuel consumption and improving driving comfort.

3. Continuously Variable Gearbox: This type of gearbox can continuously change the gear ratio, making it more fuel-efficient and smoother in operation.

4. Dual-Clutch Gearbox: This type of gearbox has two clutches, which can provide quick gear changes and improve driving dynamics.

Advantages of Gearbox Made of Different Materials

The gearbox can be made of various materials, including aluminum alloy, cast iron, steel, and magnesium alloy. Each material has its advantages and disadvantages.

1. Aluminum Alloy: This material is lightweight, which can reduce the overall weight of the vehicle and improve fuel efficiency.

2. Cast Iron: This material is durable and can withstand high loads, making it suitable for heavy-duty applications.

3. Steel: This material is strong and can resist wear and tear, making it suitable for high-speed applications.

4. Magnesium Alloy: This material is lightweight and has good heat dissipation, making it suitable for high-performance applications.

Application of Gearbox

The gearbox is widely used in various industries, including the automotive industry, industrial machinery, agricultural equipment, wind turbines, marine applications, and many others. Its use reflects its value and importance in various fields.

Future Development Trends and Opportunities

The gearbox industry is continuously evolving, and there are many development trends and opportunities in the market. Some of these trends include:

1. Lightweight and Compact Design: The demand for lightweight and compact gearbox design is growing due to the need for more fuel-efficient vehicles.

2. Electrification: As more vehicles become electrified, there is a growing demand for electric gearbox systems that can handle higher torque loads.

3. Advanced Materials: The use of advanced materials, such as carbon fiber, can improve the strength and durability of the gearbox.

How to Choose a Suitable Gearbox

Choosing a suitable gearbox requires consideration of several factors, including load requirements, ratio selection, type of gearbox, environmental factors, maintenance, and durability.

1. Load Requirements: The gearbox should be selected based on the load requirements of the application. This includes the weight of the vehicle, the torque output of the engine, and the maximum speed of the vehicle.

2. Ratio Selection: The gearbox should be selected based on the desired gear ratio. This includes the number of gears and the gear ratios of each gear.

3. Type of Gearbox: The type of gearbox should be selected based on the driving conditions and the vehicle’s purpose.

4. Environmental Factors: The gearbox should be selected based on the environmental factors, such as temperature, humidity, and vibration.

5. Maintenance and Durability: The gearbox should be selected based on its maintenance requirements and durability.

Conclusion

In conclusion, the gearbox is an essential component in various industries, and its performance characteristics, types, materials, and applications make it a vital part of many vehicles and machines. The future development trends and opportunities in the gearbox industry are promising, and choosing a suitable gearbox requires careful consideration of several factors.

China Hot selling CHINAMFG RV50 63 75 90 Worm Drive Gear Speed Reducer Transmission Gearbox lowes air compressor

China Hot Selling CHINAMFG RV50 63 75 90 Worm Drive Gear Speed Reducer Transmission Gearbox Lowes Air Compressor

Introducing our high-quality CHINAMFG RV50 63 75 90 Worm Drive Gear Speed Reducer Transmission Gearbox, a must-have for any industrial application. With its advanced features and superior performance, this gearbox is perfect for various industries, including food processing, ceramics, packaging, woodworking, and more.

Product Description

Our Gphq RV worm drive gear speed reducer transmission gearbox, part of the NMRV series, is designed with the same structure, outline, installation dimensions, and performance as European products. It is interchangeable and built with internationally advanced materials and machining processes. This gearbox offers exceptional benefits:

  1. Low noise and temperature rise
  2. High bearing capability, smooth run, and long service life
  3. Compact structure, small volume, light weight, beautiful shape, and easy installation
  4. Can operate continuously under severe environments with excellent reliability

GPHQ NMRV Aluminum Worm Gearbox Motor Details:

Type GPHQ NMRV Worm Gear Speed Reducer / Gearbox Motor
Model: NMRV25/30/40/50/63/75/90/110/130/150
Input Power: 0.06KW, 0.09KW, 0.12KW, 0.18KW, 0.22KW, 0.25KW, 0.37KW, 0.55KW, 0.75KW, 1.1KW, 1.5KW, 2.2KW, 4KW, 5.5KW, 7.5KW, 11KW, 15KW
IEC Flange 56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5
Ratio 1:7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100
Material Housing: Die-Cast Aluminum Alloy for RV25-RV90, die-cast cast iron for RV110 to RV150
Worm Gear-Brass+Cast Iron
Worm-20CrMn Ti with carburizing and quenching, surface hardness is 56-62HRC
Shaft-Chromium Steel-45#
Color: Blue/Silver or others if quantity is big
Packing: Carton or plywood case
Guarantee Time: 1 Year except for man-made destruction
Usages: Industrial Machine: Food Stuff, Ceramics, Chemical, Packing, Dyeing, Woodworking, Glass
Shaft: Output CHINAMFG shaft or output hollow shaft

Detailed Photos

Product Parameters

Certifications

Packaging & Shipping

Frequently Asked Questions (FAQ)

1. What is the minimum order quantity for our AC gearbox motor?

Our minimum order quantity is 1 piece for each type of electric gear box motor.

2. What is the warranty for our induction speed reducer motor?

Our warranty period is 1 year, excluding any damages caused by human factors.

3. Which payment methods do we accept?

We accept TT (Telegraphic Transfer) and Western Union as payment methods.

4. What are our payment terms?

For orders under $5000, we require 100% payment in advance. For orders over $5000, we require 30% payment in advance and 70% payment before shipping.

5. How do we pack our speed reduction motors?

Our speed reduction motors are packed in plywood cases or, for smaller sizes, with pallets for shipments less than one container.

6. What information should be provided when purchasing an electric helical geared motor?

When purchasing an electric helical geared motor, please provide the following information: rated power, ratio or output speed, type, voltage, mounting way, quantity, and any additional specifications.

Discover our wide range of industrial products, including agricultural gearboxes, power output shafts, sprockets, fluid couplings, worm gear reducers, gears and racks, roller chains, pulleys, planetary gearboxes, timing pulleys, bushings, and more. We pride ourselves on offering high-quality products at competitive prices, with excellent customer service. Customization of drawings and samples is also available. Contact us today for all your industrial product needs!

All the content of this page is from the Internet. The content is only for reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks of the content. Our products are only suitable for after-sales replacement parts and not original spare parts. Our replacement parts can be perfectly adapted to the original spare parts. If you need to buy original spare parts, please contact the original factory to buy.

Introduction

Gearbox, also known as transmission, is an essential component that plays a significant role in transmitting power from the engine to the wheels in a vehicle. The performance characteristics of the gearbox are as follows:

1. Transmission Efficiency: The gearbox has high transmission efficiency, which can ensure that the engine’s power is transmitted to the wheels in a more efficient way.

2. Torque Multiplier: The gearbox can also act as a torque multiplier, which can increase the torque output of the engine to the wheels.

3. Gear Ratio: The gearbox can change the gear ratio, which can provide a wide range of speeds for the vehicle.

Types and Characteristics of Gearbox

There are several types of gearbox, including manual, automatic, continuously variable, and dual-clutch gearbox. Each type has its unique characteristics that suit different driving conditions.

1. Manual Gearbox: This type of gearbox requires the driver to change the gear manually. It is simple, reliable, and cost-effective, making it popular in many vehicles.

2. Automatic Gearbox: This type of gearbox can change gears automatically, making it more convenient for drivers. It is also suitable for reducing fuel consumption and improving driving comfort.

3. Continuously Variable Gearbox: This type of gearbox can continuously change the gear ratio, making it more fuel-efficient and smoother in operation.

4. Dual-Clutch Gearbox: This type of gearbox has two clutches, which can provide quick gear changes and improve driving dynamics.

Advantages of Gearbox Made of Different Materials

The gearbox can be made of various materials, including aluminum alloy, cast iron, steel, and magnesium alloy. Each material has its advantages and disadvantages.

1. Aluminum Alloy: This material is lightweight, which can reduce the overall weight of the vehicle and improve fuel efficiency.

2. Cast Iron: This material is durable and can withstand high loads, making it suitable for heavy-duty applications.

3. Steel: This material is strong and can resist wear and tear, making it suitable for high-speed applications.

4. Magnesium Alloy: This material is lightweight and has good heat dissipation, making it suitable for high-performance applications.

Application of Gearbox

The gearbox is widely used in various industries, including the automotive industry, industrial machinery, agricultural equipment, wind turbines, marine applications, and many others. Its use reflects its value and importance in various fields.

Future Development Trends and Opportunities

The gearbox industry is continuously evolving, and there are many development trends and opportunities in the market. Some of these trends include:

1. Lightweight and Compact Design: The demand for lightweight and compact gearbox design is growing due to the need for more fuel-efficient vehicles.

2. Electrification: As more vehicles become electrified, there is a growing demand for electric gearbox systems that can handle higher torque loads.

3. Advanced Materials: The use of advanced materials, such as carbon fiber, can improve the strength and durability of the gearbox.

How to Choose a Suitable Gearbox

Choosing a suitable gearbox requires consideration of several factors, including load requirements, ratio selection, type of gearbox, environmental factors, maintenance, and durability.

1. Load Requirements: The gearbox should be selected based on the load requirements of the application. This includes the weight of the vehicle, the torque output of the engine, and the maximum speed of the vehicle.

2. Ratio Selection: The gearbox should be selected based on the desired gear ratio. This includes the number of gears and the gear ratios of each gear.

3. Type of Gearbox: The type of gearbox should be selected based on the driving conditions and the vehicle’s purpose.

4. Environmental Factors: The gearbox should be selected based on the environmental factors, such as temperature, humidity, and vibration.

5. Maintenance and Durability: The gearbox should be selected based on its maintenance requirements and durability.

Conclusion

In conclusion, the gearbox is an essential component in various industries, and its performance characteristics, types, materials, and applications make it a vital part of many vehicles and machines. The future development trends and opportunities in the gearbox industry are promising, and choosing a suitable gearbox requires careful consideration of several factors.

China Good quality Customizable Gearbox Motor 3V 6V 12V 8mm 12mm Small DC Gear Motor Motor Ie1 FF Fk 12 N20 DC Motor with Reducing air compressor for car

China Good quality Customizable Gearbox Motor 3V 6V 12V 8mm 12mm Small DC Gear Motor Motor Ie1 FF Fk 12 N20 DC Motor with Reducing air compressor for car

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nullam aliquam ligula id orci tristique, non fermentum lectus bibendum. Integer sit amet purus a lacus hendrerit vestibulum vel a nisi. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia curae; Donec in eros ac metus auctor feugiat. Phasellus porttitor, ligula eu congue commodo, lacus arcu bibendum arcu, sed ultrices turpis justo sagittis diam. In hac habitasse platea dictumst.

Product Description

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed vulputate, turpis ut laoreet vestibulum, tortor mauris imperdiet ligula, id venenatis tellus dolor eget purus. Nullam consequat sapien a iaculis ullamcorper. Mauris eu purus sed tortor malesuada semper. Quisque eu augue vestibulum, tristique odio a, congue lectus. In sagittis, metus eget pellentesque varius, turpis elit fermentum dolor, sed venenatis tellus risus in neque. In hac habitasse platea dictumst. Praesent tristique feugiat mi, vitae iaculis ante facilisis et.

Product Parameters

Item Gear motor
OEM & ODM Accepted
MOQ 1000 units
Capacity 200,000 units/month
Package Carton
Place of Origin HangZhou/HangZhou, ZheJiang, China
Delivery Date Depending on the quantity, please ask the salesman.
Payment Terms 30% advance, 70% balance
Port of Shipment HangZhou / Hong Kong

Detailed Photos

1. What kind of motor do you supply?

CHINAMFG specializes in providing high-quality DC motors and gear motors. Our range includes motors with a diameter ranging from 6-80 mm. We also offer automotive motors and vibration motors. Additionally, we provide brushless motors to cater to various needs.

2. What’s the lead time for samples or mass production?

For samples, we usually require 15-25 days for production. As for mass production, it typically takes 35-40 days for DC motor production and 45-60 days for gear motor production.

3. Could you mind sending the quotation for this motor?

Since all our motors are customized based on specific requirements and annual quantity, we will gladly provide a quotation once you send us your specific requests.

4. Do you offer accessories like encoder, PCB, connector, or soldering wired for the motor?

While our expertise lies in motors rather than accessories, if you have a significant annual demand, we can discuss the possibility of providing accessories by applying to our engineers.

5. Are your motors certified with UL, CB Tüv, CE?

Yes, all our motors are UL, CB Tüv, and CE compliant. We ensure that our products adhere to the highest quality and safety standards. Furthermore, our motors are manufactured under REACH and ROHS regulations. We can provide motor’s exploring drawing and BOM to assist in the UL certification process for your products. Additionally, we can incorporate motors built-in filters based on your EMC directive to ensure EMC compliance.

For more information, please visit our product catalog.

Our company mainly supplies various products for industrial use. We specialize in agricultural gearboxes, power output shafts, sprockets, fluid couplings, worm gear reducers, gears and racks, roller chains, pulleys, planetary gearboxes, timing pulleys, bushings, and more. We take pride in offering high-quality products at preferential prices, accompanied by considerate services. Customers are welcome to customize drawings and samples to meet their specific requirements.

All the content of this page is from the Internet. The content is only for reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks of the content. Our products are only suitable for after-sales replacement parts and not original spare parts. Our replacement parts can be perfectly adapted to the original spare parts. If you need to buy original spare parts, please contact the original factory to buy.

Introduction

Gearbox, also known as transmission, is an essential component that plays a significant role in transmitting power from the engine to the wheels in a vehicle. The performance characteristics of the gearbox are as follows:

1. Transmission Efficiency: The gearbox has high transmission efficiency, which can ensure that the engine’s power is transmitted to the wheels in a more efficient way.

2. Torque Multiplier: The gearbox can also act as a torque multiplier, which can increase the torque output of the engine to the wheels.

3. Gear Ratio: The gearbox can change the gear ratio, which can provide a wide range of speeds for the vehicle.

Types and Characteristics of Gearbox

There are several types of gearbox, including manual, automatic, continuously variable, and dual-clutch gearbox. Each type has its unique characteristics that suit different driving conditions.

1. Manual Gearbox: This type of gearbox requires the driver to change the gear manually. It is simple, reliable, and cost-effective, making it popular in many vehicles.

2. Automatic Gearbox: This type of gearbox can change gears automatically, making it more convenient for drivers. It is also suitable for reducing fuel consumption and improving driving comfort.

3. Continuously Variable Gearbox: This type of gearbox can continuously change the gear ratio, making it more fuel-efficient and smoother in operation.

4. Dual-Clutch Gearbox: This type of gearbox has two clutches, which can provide quick gear changes and improve driving dynamics.

Advantages of Gearbox Made of Different Materials

The gearbox can be made of various materials, including aluminum alloy, cast iron, steel, and magnesium alloy. Each material has its advantages and disadvantages.

1. Aluminum Alloy: This material is lightweight, which can reduce the overall weight of the vehicle and improve fuel efficiency.

2. Cast Iron: This material is durable and can withstand high loads, making it suitable for heavy-duty applications.

3. Steel: This material is strong and can resist wear and tear, making it suitable for high-speed applications.

4. Magnesium Alloy: This material is lightweight and has good heat dissipation, making it suitable for high-performance applications.

Application of Gearbox

The gearbox is widely used in various industries, including the automotive industry, industrial machinery, agricultural equipment, wind turbines, marine applications, and many others. Its use reflects its value and importance in various fields.

Future Development Trends and Opportunities

The gearbox industry is continuously evolving, and there are many development trends and opportunities in the market. Some of these trends include:

1. Lightweight and Compact Design: The demand for lightweight and compact gearbox design is growing due to the need for more fuel-efficient vehicles.

2. Electrification: As more vehicles become electrified, there is a growing demand for electric gearbox systems that can handle higher torque loads.

3. Advanced Materials: The use of advanced materials, such as carbon fiber, can improve the strength and durability of the gearbox.

How to Choose a Suitable Gearbox

Choosing a suitable gearbox requires consideration of several factors, including load requirements, ratio selection, type of gearbox, environmental factors, maintenance, and durability.

1. Load Requirements: The gearbox should be selected based on the load requirements of the application. This includes the weight of the vehicle, the torque output of the engine, and the maximum speed of the vehicle.

2. Ratio Selection: The gearbox should be selected based on the desired gear ratio. This includes the number of gears and the gear ratios of each gear.

3. Type of Gearbox: The type of gearbox should be selected based on the driving conditions and the vehicle’s purpose.

4. Environmental Factors: The gearbox should be selected based on the environmental factors, such as temperature, humidity, and vibration.

5. Maintenance and Durability: The gearbox should be selected based on its maintenance requirements and durability.

Conclusion

In conclusion, the gearbox is an essential component in various industries, and its performance characteristics, types, materials, and applications make it a vital part of many vehicles and machines. The future development trends and opportunities in the gearbox industry are promising, and choosing a suitable gearbox requires careful consideration of several factors.

China factory Double Worm Gear Reducer Ratio 1200 Size 40/90 Gearbox for Boat Lift mini air compressor

Double Worm Gear Reducer Ratio 1200 Size 40/90 Gearbox for Boat Lift mini air compressor

This high-quality Double Worm Gear Reducer is designed for use in boat lifts and mini air compressors. The reducer features a ratio of 1200 and a size of 40/90, making it the perfect fit for a range of applications.

Detailed Images

Check out these detailed images of the Worm Gear Reducer NMRV 130 150:

Our upgraded gear reducer models offer even more advanced features:

Specifications

Item Worm Gear Reducer Worm Gearbox
Warranty 1 Year
Applicable Industries Manufacturing Plant, Food & Beverage Factory, Farms, Construction works, Energy & Mining, Other
Weight (KG) 6.2
Customized Support OEM
Place of Origin China
Brand Name CHINAMFG
Gearing Arrangement Worm
Output Torque 2.6-1650Nm
Input Speed 1400rpm
Output Speed 0.5-186.7rpm
Product name Worm Gear Reducer Worm Gearbox
Size 130 150
Ratio 5/7.5/10/15/20/25/30/40/50/60/80/100
Worm Wheel Material 12-2 Tin Bronze
Worm Shaft Material 20CrMnTi
Bearing C&U
Oil Seal CHINAMFG CHINAMFG
Lubricant Oil Synthetic Oil
Color Blue(RAL5571)/Silver Grey (RAL9571)/Custom-Made

The Worm Gear Reducer NMRV 130 150 is made of high-quality aluminium alloy, making it lightweight and non-rusting. The reducer model from 25 to 90 are made of aluminum alloy die-casting material, while model 110-150 are made of cast iron. The reducer has a compact structure and rust-proofing on its surface, making it visually appealing. Its small volume saves mounting space, while its large output torque and high radiating efficiency ensure stable transmission with minimal vibration and noise. It is suitable for omnibearing installation and features a range of connecting structures to meet different requirements. Additionally, inch sizes reducer are available.

The FCN worm gearbox reducer is a commodity with sophisticated design and continuous improvements. Its main features include high-quality aluminium alloy construction, lightweight and non-rusting design, large output torque, smooth running, low noise, high radiating efficiency, good-looking appearance, durable service life, small volume, and suitability for all mounting positions.

Drawings

Packaging & Delivery

Our Worm Gear Reduce and Helical Geared Motor are carefully packaged for safe shipping:

Our lead time is 20-30 days after CHINAMFG receives your order confirmation.

Other Products

At CHINAMFG, we offer a wide range of products for industrial use. Our product line includes agricultural gearboxes, power output shafts, sprockets, fluid couplings, worm gear reducers, gears and racks, roller chains, pulleys, planetary gearboxes, timing pulleys, bushings, and more. We prioritize high-quality products, preferential prices, and considerate services. Customers are welcome to customize drawings and samples.

FAQs

1. What is the ratio of the Double Worm Gear Reducer featured in this article?

The Double Worm Gear Reducer featured in this article has a ratio of 1200.

2. Is the Worm Gear Reducer NMRV 130 150 made of aluminium alloy?

Yes, the Worm Gear Reducer NMRV 130 150 is made of high-quality aluminium alloy.

3. What industries is this product suitable for?

This product is suitable for a range of industries, including manufacturing plant, food & beverage factory, farms, construction works, energy & mining, and other industries.

4. What connecting structures does this reducer feature?

This reducer features a range of connecting structures to meet different requirements.

5. What is the lead time for orders from CHINAMFG?

The lead time for orders from CHINAMFG is 20-30 days after order confirmation is received.

All the content of this page is from the Internet. The content is only for reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks of the content. Our products are only suitable for after-sales replacement parts and not original spare parts. Our replacement parts can be perfectly adapted to the original spare parts. If you need to buy original spare parts, please contact the original factory to buy.

Introduction

Gearbox, also known as transmission, is an essential component that plays a significant role in transmitting power from the engine to the wheels in a vehicle. The performance characteristics of the gearbox are as follows:

1. Transmission Efficiency: The gearbox has high transmission efficiency, which can ensure that the engine’s power is transmitted to the wheels in a more efficient way.

2. Torque Multiplier: The gearbox can also act as a torque multiplier, which can increase the torque output of the engine to the wheels.

3. Gear Ratio: The gearbox can change the gear ratio, which can provide a wide range of speeds for the vehicle.

Types and Characteristics of Gearbox

There are several types of gearbox, including manual, automatic, continuously variable, and dual-clutch gearbox. Each type has its unique characteristics that suit different driving conditions.

1. Manual Gearbox: This type of gearbox requires the driver to change the gear manually. It is simple, reliable, and cost-effective, making it popular in many vehicles.

2. Automatic Gearbox: This type of gearbox can change gears automatically, making it more convenient for drivers. It is also suitable for reducing fuel consumption and improving driving comfort.

3. Continuously Variable Gearbox: This type of gearbox can continuously change the gear ratio, making it more fuel-efficient and smoother in operation.

4. Dual-Clutch Gearbox: This type of gearbox has two clutches, which can provide quick gear changes and improve driving dynamics.

Advantages of Gearbox Made of Different Materials

The gearbox can be made of various materials, including aluminum alloy, cast iron, steel, and magnesium alloy. Each material has its advantages and disadvantages.

1. Aluminum Alloy: This material is lightweight, which can reduce the overall weight of the vehicle and improve fuel efficiency.

2. Cast Iron: This material is durable and can withstand high loads, making it suitable for heavy-duty applications.

3. Steel: This material is strong and can resist wear and tear, making it suitable for high-speed applications.

4. Magnesium Alloy: This material is lightweight and has good heat dissipation, making it suitable for high-performance applications.

Application of Gearbox

The gearbox is widely used in various industries, including the automotive industry, industrial machinery, agricultural equipment, wind turbines, marine applications, and many others. Its use reflects its value and importance in various fields.

Future Development Trends and Opportunities

The gearbox industry is continuously evolving, and there are many development trends and opportunities in the market. Some of these trends include:

1. Lightweight and Compact Design: The demand for lightweight and compact gearbox design is growing due to the need for more fuel-efficient vehicles.

2. Electrification: As more vehicles become electrified, there is a growing demand for electric gearbox systems that can handle higher torque loads.

3. Advanced Materials: The use of advanced materials, such as carbon fiber, can improve the strength and durability of the gearbox.

How to Choose a Suitable Gearbox

Choosing a suitable gearbox requires consideration of several factors, including load requirements, ratio selection, type of gearbox, environmental factors, maintenance, and durability.

1. Load Requirements: The gearbox should be selected based on the load requirements of the application. This includes the weight of the vehicle, the torque output of the engine, and the maximum speed of the vehicle.

2. Ratio Selection: The gearbox should be selected based on the desired gear ratio. This includes the number of gears and the gear ratios of each gear.

3. Type of Gearbox: The type of gearbox should be selected based on the driving conditions and the vehicle’s purpose.

4. Environmental Factors: The gearbox should be selected based on the environmental factors, such as temperature, humidity, and vibration.

5. Maintenance and Durability: The gearbox should be selected based on its maintenance requirements and durability.

Conclusion

In conclusion, the gearbox is an essential component in various industries, and its performance characteristics, types, materials, and applications make it a vital part of many vehicles and machines. The future development trends and opportunities in the gearbox industry are promising, and choosing a suitable gearbox requires careful consideration of several factors.

China best Agricultural Wrapping Machine Beaters Rotary Tillers Universal Gearbox best air compressor

China’s Best Agricultural Wrapping Machine Beaters Rotary Tillers Universal Gearbox and Air Compressor

Our KLF2100 gearbox is the perfect solution for Agricultural wrapping machines, beaters, rotary tillers, and other farm equipment. With its compact design, small footprint, and easy installation, this gearbox is ideal for farmers seeking to improve their equipment’s performance. Its universal gearbox and transmission ratio of 1:3 make it suitable for various types of harvesters and agricultural machines.

Product Parameters

  • Transmission Ratio: 1:3
  • Multiple Reductions: Yes
  • Universal Gearbox: Yes
  • Suitable for Harvesters, Agricultural Wrapping Machines, Beaters, Rotary Tillers, and more

Detailed Photos

Here are some detailed photos of our KLF2100 gearbox.

KLF2100 gearbox photo 1
KLF2100 gearbox photo 2

Why Choose Our Gearbox?

Our KLF2100 gearbox is designed with high-quality materials and advanced technology to ensure the best performance and durability. It is easy to install and maintain, making it an ideal choice for farmers seeking to improve their equipment’s efficiency. Our gearbox is suitable for various types of harvesters and agricultural machines, making it a versatile and cost-effective solution for your farming needs.

Short Sentences:

  • High-quality materials and advanced technology
  • Easy to install and maintain
  • Versatile and cost-effective solution

Long Sentences:

  • Our KLF2100 gearbox is designed with high-quality materials and advanced technology to ensure the best performance and durability, making it a reliable choice for farmers seeking to improve their equipment’s efficiency.
  • With its easy installation and maintenance, our gearbox is an ideal solution for farmers seeking to save time and money while improving their equipment’s performance.
  • Our gearbox’s versatility and cost-effectiveness make it an excellent choice for farmers seeking to meet various farming needs without breaking the bank.

Our Other Industrial Products

In addition to agricultural gearboxes, we also supply a wide range of products for industrial use, including power output shafts, sprockets, fluid couplings, worm gear reducers, gears and racks, roller chains, pulleys, planetary gearboxes, timing pulleys, bushings, and more. We are committed to providing high-quality products, preferential prices, and considerate services to all of our customers. We welcome customers to customize their drawings and samples to ensure that their needs are met.

FAQs

  1. What is the transmission ratio of the KLF2100 gearbox?
  2. What types of agricultural machines is the KLF2100 gearbox suitable for?
  3. What makes the KLF2100 gearbox a cost-effective solution for farmers?
  4. What other industrial products does your company supply?
  5. Do you welcome customers to customize their drawings and samples?

All the content of this page is from the Internet. The content is only for reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks of the content. Our products are only suitable for after-sales replacement parts and not original spare parts. Our replacement parts can be perfectly adapted to the original spare parts. If you need to buy original spare parts, please contact the original factory to buy.

Introduction

Gearbox, also known as transmission, is an essential component that plays a significant role in transmitting power from the engine to the wheels in a vehicle. The performance characteristics of the gearbox are as follows:

1. Transmission Efficiency: The gearbox has high transmission efficiency, which can ensure that the engine’s power is transmitted to the wheels in a more efficient way.

2. Torque Multiplier: The gearbox can also act as a torque multiplier, which can increase the torque output of the engine to the wheels.

3. Gear Ratio: The gearbox can change the gear ratio, which can provide a wide range of speeds for the vehicle.

Types and Characteristics of Gearbox

There are several types of gearbox, including manual, automatic, continuously variable, and dual-clutch gearbox. Each type has its unique characteristics that suit different driving conditions.

1. Manual Gearbox: This type of gearbox requires the driver to change the gear manually. It is simple, reliable, and cost-effective, making it popular in many vehicles.

2. Automatic Gearbox: This type of gearbox can change gears automatically, making it more convenient for drivers. It is also suitable for reducing fuel consumption and improving driving comfort.

3. Continuously Variable Gearbox: This type of gearbox can continuously change the gear ratio, making it more fuel-efficient and smoother in operation.

4. Dual-Clutch Gearbox: This type of gearbox has two clutches, which can provide quick gear changes and improve driving dynamics.

Advantages of Gearbox Made of Different Materials

The gearbox can be made of various materials, including aluminum alloy, cast iron, steel, and magnesium alloy. Each material has its advantages and disadvantages.

1. Aluminum Alloy: This material is lightweight, which can reduce the overall weight of the vehicle and improve fuel efficiency.

2. Cast Iron: This material is durable and can withstand high loads, making it suitable for heavy-duty applications.

3. Steel: This material is strong and can resist wear and tear, making it suitable for high-speed applications.

4. Magnesium Alloy: This material is lightweight and has good heat dissipation, making it suitable for high-performance applications.

Application of Gearbox

The gearbox is widely used in various industries, including the automotive industry, industrial machinery, agricultural equipment, wind turbines, marine applications, and many others. Its use reflects its value and importance in various fields.

Future Development Trends and Opportunities

The gearbox industry is continuously evolving, and there are many development trends and opportunities in the market. Some of these trends include:

1. Lightweight and Compact Design: The demand for lightweight and compact gearbox design is growing due to the need for more fuel-efficient vehicles.

2. Electrification: As more vehicles become electrified, there is a growing demand for electric gearbox systems that can handle higher torque loads.

3. Advanced Materials: The use of advanced materials, such as carbon fiber, can improve the strength and durability of the gearbox.

How to Choose a Suitable Gearbox

Choosing a suitable gearbox requires consideration of several factors, including load requirements, ratio selection, type of gearbox, environmental factors, maintenance, and durability.

1. Load Requirements: The gearbox should be selected based on the load requirements of the application. This includes the weight of the vehicle, the torque output of the engine, and the maximum speed of the vehicle.

2. Ratio Selection: The gearbox should be selected based on the desired gear ratio. This includes the number of gears and the gear ratios of each gear.

3. Type of Gearbox: The type of gearbox should be selected based on the driving conditions and the vehicle’s purpose.

4. Environmental Factors: The gearbox should be selected based on the environmental factors, such as temperature, humidity, and vibration.

5. Maintenance and Durability: The gearbox should be selected based on its maintenance requirements and durability.

Conclusion

In conclusion, the gearbox is an essential component in various industries, and its performance characteristics, types, materials, and applications make it a vital part of many vehicles and machines. The future development trends and opportunities in the gearbox industry are promising, and choosing a suitable gearbox requires careful consideration of several factors.

China wholesaler Smr Shaft Mounted Flat Type Gear Box for Belt Conveyor Drive air compressor parts

China Wholesaler: SMR Shaft Mounted Flat Type Gear Box for Belt Conveyor Drive

The SMR Shaft Mounted Flat Type Motor Reduction Gear Box is designed for belt conveyor drive systems. With its high strength gear box, gears, and shafts, it offers sturdy and durable performance. The gear box is equipped with two metric output shaft bore diameters, providing versatility and flexibility in installation. Additionally, it offers an optional backstop feature to prevent backdriving, although it is not recommended for the gear ratio 5. The double lips skeleton oil seal ensures effective sealing and dust-proofing.

This gear box is widely used in belt conveyor and pulley drive systems, offering reliable and efficient power transmission. Its robust construction and high-quality components make it an ideal choice for demanding industrial applications.

Features:

  1. Sturdy and Durable: The gear box, gears, and shafts are made with high-strength materials, ensuring long-lasting performance.
  2. Versatile Installation: The gear box is available with two metric output shaft bore diameters, allowing for easy customization and installation.
  3. Optional Backstop: The gear box offers an optional backstop feature to prevent backdriving, enhancing operational safety.
  4. Effective Sealing: The double lips skeleton oil seal combines the functions of seal and dust-proof, ensuring reliable operation in various environments.
  5. Wide Application: This gear box is widely used in belt conveyor and pulley drive systems, providing efficient power transmission.

Product Photo:

Specifications for Shaft Mounted Gearbox:

FAQ

Q: Can the gearbox be customized according to specific requirements?

A: Yes, we offer customization options for various aspects such as flange, shaft, configuration, and material.

Q: Do you provide samples for testing?

A: Yes, samples are available for testing purposes.

Q: What is the minimum order quantity (MOQ)?

A: The MOQ for our products is 10pcs for initial orders.

Q: What is the lead time for standard and customized products?

A: Standard products usually require 5-30 days for delivery, while customized products may take a bit longer.

Q: Do you provide technology support?

A: Yes, our company has a dedicated design and development team that can provide technology support as needed.

Our company specializes in supplying various high-quality industrial products, including agricultural gearboxes, power output shafts, sprockets, fluid couplings, worm gear reducers, gears and racks, roller chains, pulleys, planetary gearboxes, timing pulleys, bushings, and more. We prioritize product quality, competitive pricing, and excellent customer service. We welcome customization requests for drawings and samples, ensuring that our products meet specific requirements.

All the content of this page is from the Internet. The content is only for reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks of the content. Our products are only suitable for after-sales replacement parts and not original spare parts. Our replacement parts can be perfectly adapted to the original spare parts. If you need to buy original spare parts, please contact the original factory to buy.

Introduction

Gearbox, also known as transmission, is an essential component that plays a significant role in transmitting power from the engine to the wheels in a vehicle. The performance characteristics of the gearbox are as follows:

1. Transmission Efficiency: The gearbox has high transmission efficiency, which can ensure that the engine’s power is transmitted to the wheels in a more efficient way.

2. Torque Multiplier: The gearbox can also act as a torque multiplier, which can increase the torque output of the engine to the wheels.

3. Gear Ratio: The gearbox can change the gear ratio, which can provide a wide range of speeds for the vehicle.

Types and Characteristics of Gearbox

There are several types of gearbox, including manual, automatic, continuously variable, and dual-clutch gearbox. Each type has its unique characteristics that suit different driving conditions.

1. Manual Gearbox: This type of gearbox requires the driver to change the gear manually. It is simple, reliable, and cost-effective, making it popular in many vehicles.

2. Automatic Gearbox: This type of gearbox can change gears automatically, making it more convenient for drivers. It is also suitable for reducing fuel consumption and improving driving comfort.

3. Continuously Variable Gearbox: This type of gearbox can continuously change the gear ratio, making it more fuel-efficient and smoother in operation.

4. Dual-Clutch Gearbox: This type of gearbox has two clutches, which can provide quick gear changes and improve driving dynamics.

Advantages of Gearbox Made of Different Materials

The gearbox can be made of various materials, including aluminum alloy, cast iron, steel, and magnesium alloy. Each material has its advantages and disadvantages.

1. Aluminum Alloy: This material is lightweight, which can reduce the overall weight of the vehicle and improve fuel efficiency.

2. Cast Iron: This material is durable and can withstand high loads, making it suitable for heavy-duty applications.

3. Steel: This material is strong and can resist wear and tear, making it suitable for high-speed applications.

4. Magnesium Alloy: This material is lightweight and has good heat dissipation, making it suitable for high-performance applications.

Application of Gearbox

The gearbox is widely used in various industries, including the automotive industry, industrial machinery, agricultural equipment, wind turbines, marine applications, and many others. Its use reflects its value and importance in various fields.

Future Development Trends and Opportunities

The gearbox industry is continuously evolving, and there are many development trends and opportunities in the market. Some of these trends include:

1. Lightweight and Compact Design: The demand for lightweight and compact gearbox design is growing due to the need for more fuel-efficient vehicles.

2. Electrification: As more vehicles become electrified, there is a growing demand for electric gearbox systems that can handle higher torque loads.

3. Advanced Materials: The use of advanced materials, such as carbon fiber, can improve the strength and durability of the gearbox.

How to Choose a Suitable Gearbox

Choosing a suitable gearbox requires consideration of several factors, including load requirements, ratio selection, type of gearbox, environmental factors, maintenance, and durability.

1. Load Requirements: The gearbox should be selected based on the load requirements of the application. This includes the weight of the vehicle, the torque output of the engine, and the maximum speed of the vehicle.

2. Ratio Selection: The gearbox should be selected based on the desired gear ratio. This includes the number of gears and the gear ratios of each gear.

3. Type of Gearbox: The type of gearbox should be selected based on the driving conditions and the vehicle’s purpose.

4. Environmental Factors: The gearbox should be selected based on the environmental factors, such as temperature, humidity, and vibration.

5. Maintenance and Durability: The gearbox should be selected based on its maintenance requirements and durability.

Conclusion

In conclusion, the gearbox is an essential component in various industries, and its performance characteristics, types, materials, and applications make it a vital part of many vehicles and machines. The future development trends and opportunities in the gearbox industry are promising, and choosing a suitable gearbox requires careful consideration of several factors.

China factory Right Angle Aluminum Body Worm Gearbox with Output Flange with Hot selling

China Factory: Right Angle Aluminum Body Worm Gearbox with Output Flange

Our right angle aluminum body worm gearbox with output flange is a highly efficient and durable solution for various industrial applications. With its hot selling features, this gearbox offers exceptional performance and reliability. Let’s delve into the details:

Product Description

  • RV – Sizes:–150
  • Input Options: with input shaft, With Square flange, With Input Flange
  • Input Power: 0.06 to 11 kW
  • RV-Size: from 030 to 105 in die-cast aluminium alloy budy and over 110 in cast iron
  • Ratios: between 5 and 100
  • Max torque: 1550 N.m and admissible output radial loads max 8771 N
  • Aluminium units are supplied complete with synthetic oil and allow for universal mounting positions, with no need to modify lubricant quantity
  • Worm wheel: Copper (KK Cu)
  • Loading capacity in accordance with: ISO 9001:2015/GB/T 19001-2016
  • Size 030 and over are painted with RAL 5571 blue
  • Worm gear reducers are available with different combinations: NMRV+NMRV, NMRVpower+NMRV, JWB+NMRV
  • NMRV, NRV+VS, NMRV+AS, NMRV+VS, NMRV+F
  • Options: torque arm, output flange, viton oil seals, low/high temperature oil, filling/drain/breather/level plug

Technical Parameters

Type Old Type Output Torque Output Shaft Dia.
SNW030 RV030 21N.m φ14
SNW040 RV040 45N.m φ19
SNW050 RV050 84N.m φ25
SNW063 RV063 160N.m φ25
SNW075 RV075 230N.m φ28
SNW090 RV090 410N.m φ35
SNW105 RV105 630N.m φ42
SNW110 RV110 725N.m φ42
SNW130 RV130 1050N.m φ45
SNW150 RV150 1550N.m φ50

Our company specializes in providing high-quality industrial products, offering a wide range of solutions for various applications. In addition to the right angle aluminum body worm gearbox with output flange, we also supply agricultural gearboxes, power output shafts, sprockets, fluid couplings, worm gear reducers, gears and racks, roller chains, pulleys, planetary gearboxes, timing pulleys, bushings, and more. Our products are designed to meet the highest standards of performance and durability, and we offer them at competitive prices.

At CHINAMFG Drive, we are committed to delivering excellent products and services to our customers. We pride ourselves on our attention to detail, superior quality control, and customer satisfaction. Our team of experts is dedicated to providing customized solutions, whether it’s based on drawings or samples. We strive to exceed your expectations with our high-quality products, competitive prices, and exceptional customer service.

FAQs:

  1. What makes the right angle aluminum body worm gearbox with output flange special?

    Our gearbox is made from high-quality materials, ensuring durability and reliability even in demanding industrial environments. It offers a wide range of input options and ratios to meet specific application requirements. Its universal mounting positions and easy installation make it a versatile choice for various industries.

  2. Can I customize the output flange of the gearbox?

    Yes, we offer customization options for the output flange. Our team can work with you to design the perfect solution to meet your specific needs.

  3. Do you provide warranty for your gearboxes?

    Yes, we provide a warranty for our gearboxes to ensure customer satisfaction. Please contact our sales team for more information on our warranty policy.

  4. Do you offer technical support for installation and maintenance?

    Absolutely! Our technical team is available to provide assistance and support regarding the installation and maintenance of our gearboxes. We are dedicated to ensuring that our customers have a seamless experience with our products.

  5. Can I get a sample of the right angle aluminum body worm gearbox with output flange?

    Yes, we offer samples of our gearboxes. Please contact our sales team to request a sample and discuss the details.

All the content of this page is from the Internet. The content is only for reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks of the content. Our products are only suitable for after-sales replacement parts and not original spare parts. Our replacement parts can be perfectly adapted to the original spare parts. If you need to buy original spare parts, please contact the original factory to buy.

Introduction

Gearbox, also known as transmission, is an essential component that plays a significant role in transmitting power from the engine to the wheels in a vehicle. The performance characteristics of the gearbox are as follows:

1. Transmission Efficiency: The gearbox has high transmission efficiency, which can ensure that the engine’s power is transmitted to the wheels in a more efficient way.

2. Torque Multiplier: The gearbox can also act as a torque multiplier, which can increase the torque output of the engine to the wheels.

3. Gear Ratio: The gearbox can change the gear ratio, which can provide a wide range of speeds for the vehicle.

Types and Characteristics of Gearbox

There are several types of gearbox, including manual, automatic, continuously variable, and dual-clutch gearbox. Each type has its unique characteristics that suit different driving conditions.

1. Manual Gearbox: This type of gearbox requires the driver to change the gear manually. It is simple, reliable, and cost-effective, making it popular in many vehicles.

2. Automatic Gearbox: This type of gearbox can change gears automatically, making it more convenient for drivers. It is also suitable for reducing fuel consumption and improving driving comfort.

3. Continuously Variable Gearbox: This type of gearbox can continuously change the gear ratio, making it more fuel-efficient and smoother in operation.

4. Dual-Clutch Gearbox: This type of gearbox has two clutches, which can provide quick gear changes and improve driving dynamics.

Advantages of Gearbox Made of Different Materials

The gearbox can be made of various materials, including aluminum alloy, cast iron, steel, and magnesium alloy. Each material has its advantages and disadvantages.

1. Aluminum Alloy: This material is lightweight, which can reduce the overall weight of the vehicle and improve fuel efficiency.

2. Cast Iron: This material is durable and can withstand high loads, making it suitable for heavy-duty applications.

3. Steel: This material is strong and can resist wear and tear, making it suitable for high-speed applications.

4. Magnesium Alloy: This material is lightweight and has good heat dissipation, making it suitable for high-performance applications.

Application of Gearbox

The gearbox is widely used in various industries, including the automotive industry, industrial machinery, agricultural equipment, wind turbines, marine applications, and many others. Its use reflects its value and importance in various fields.

Future Development Trends and Opportunities

The gearbox industry is continuously evolving, and there are many development trends and opportunities in the market. Some of these trends include:

1. Lightweight and Compact Design: The demand for lightweight and compact gearbox design is growing due to the need for more fuel-efficient vehicles.

2. Electrification: As more vehicles become electrified, there is a growing demand for electric gearbox systems that can handle higher torque loads.

3. Advanced Materials: The use of advanced materials, such as carbon fiber, can improve the strength and durability of the gearbox.

How to Choose a Suitable Gearbox

Choosing a suitable gearbox requires consideration of several factors, including load requirements, ratio selection, type of gearbox, environmental factors, maintenance, and durability.

1. Load Requirements: The gearbox should be selected based on the load requirements of the application. This includes the weight of the vehicle, the torque output of the engine, and the maximum speed of the vehicle.

2. Ratio Selection: The gearbox should be selected based on the desired gear ratio. This includes the number of gears and the gear ratios of each gear.

3. Type of Gearbox: The type of gearbox should be selected based on the driving conditions and the vehicle’s purpose.

4. Environmental Factors: The gearbox should be selected based on the environmental factors, such as temperature, humidity, and vibration.

5. Maintenance and Durability: The gearbox should be selected based on its maintenance requirements and durability.

Conclusion

In conclusion, the gearbox is an essential component in various industries, and its performance characteristics, types, materials, and applications make it a vital part of many vehicles and machines. The future development trends and opportunities in the gearbox industry are promising, and choosing a suitable gearbox requires careful consideration of several factors.

China best Top Quality Nmrv Worm Speed Reducer Transmission Gearboxes air compressor lowes

China Best Top Quality NMRV Worm Speed Reducer Transmission Gearboxes for Air Compressor Lowes

The China Best Top Quality NMRV Worm Speed Reducer Transmission Gearboxes for Air Compressor Lowes is a high-quality product designed for efficient and reliable transmission of power. With its compact structure and aluminum alloy die-casted gearbox, this gear reducer offers a space-saving solution for various industrial applications. Its highly accurate performance ensures precise operation, while its ability to run in both forward and backward directions provides flexibility in usage. Additionally, the NMRV Worm Speed Reducer features high overload capacity and delivers stable transmission with reduced vibration and noise.

Features

  • Aluminum alloy die-casted gearbox
  • Compact structure saves mounting space
  • Highly accurate
  • Runs forward and backward
  • High overload capacity
  • Stable transmission with reduced vibration and noise

Characteristics

The NMRV Worm Speed Reducer exhibits the following characteristics:

  1. High-quality aluminum alloy quadrate case
  2. High efficiency
  3. Small size, compact structure, and light weight
  4. Combination of 2 single-step worm gear speed reducers, meeting the requirements of a super speed ratio

Technical Data

  • Input power: 0.06kW-15kW
  • Output torque: 7.8-1195N.m
  • Speed ratio: (5-100) 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100
  • Adapt for IEC, NEMA, SERVO

Materials

  • From RV25 up to RV105: Aluminium alloy housing
  • From RV110 to RV150: Cast iron housing
  • Seal: CHINAMFG Seal from ZheJiang
  • Bearing: Homemade Bearing

Color

  • RAL5571
  • Blue
  • Silver

Quality Control

  • QualityAll the content of this page is from the Internet. The content is only for reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks of the content. Our products are only suitable for after-sales replacement parts and not original spare parts. Our replacement parts can be perfectly adapted to the original spare parts. If you need to buy original spare parts, please contact the original factory to buy.

    Introduction

    Gearbox, also known as transmission, is an essential component that plays a significant role in transmitting power from the engine to the wheels in a vehicle. The performance characteristics of the gearbox are as follows:

    1. Transmission Efficiency: The gearbox has high transmission efficiency, which can ensure that the engine’s power is transmitted to the wheels in a more efficient way.

    2. Torque Multiplier: The gearbox can also act as a torque multiplier, which can increase the torque output of the engine to the wheels.

    3. Gear Ratio: The gearbox can change the gear ratio, which can provide a wide range of speeds for the vehicle.

    Types and Characteristics of Gearbox

    There are several types of gearbox, including manual, automatic, continuously variable, and dual-clutch gearbox. Each type has its unique characteristics that suit different driving conditions.

    1. Manual Gearbox: This type of gearbox requires the driver to change the gear manually. It is simple, reliable, and cost-effective, making it popular in many vehicles.

    2. Automatic Gearbox: This type of gearbox can change gears automatically, making it more convenient for drivers. It is also suitable for reducing fuel consumption and improving driving comfort.

    3. Continuously Variable Gearbox: This type of gearbox can continuously change the gear ratio, making it more fuel-efficient and smoother in operation.

    4. Dual-Clutch Gearbox: This type of gearbox has two clutches, which can provide quick gear changes and improve driving dynamics.

    Advantages of Gearbox Made of Different Materials

    The gearbox can be made of various materials, including aluminum alloy, cast iron, steel, and magnesium alloy. Each material has its advantages and disadvantages.

    1. Aluminum Alloy: This material is lightweight, which can reduce the overall weight of the vehicle and improve fuel efficiency.

    2. Cast Iron: This material is durable and can withstand high loads, making it suitable for heavy-duty applications.

    3. Steel: This material is strong and can resist wear and tear, making it suitable for high-speed applications.

    4. Magnesium Alloy: This material is lightweight and has good heat dissipation, making it suitable for high-performance applications.

    Application of Gearbox

    The gearbox is widely used in various industries, including the automotive industry, industrial machinery, agricultural equipment, wind turbines, marine applications, and many others. Its use reflects its value and importance in various fields.

    Future Development Trends and Opportunities

    The gearbox industry is continuously evolving, and there are many development trends and opportunities in the market. Some of these trends include:

    1. Lightweight and Compact Design: The demand for lightweight and compact gearbox design is growing due to the need for more fuel-efficient vehicles.

    2. Electrification: As more vehicles become electrified, there is a growing demand for electric gearbox systems that can handle higher torque loads.

    3. Advanced Materials: The use of advanced materials, such as carbon fiber, can improve the strength and durability of the gearbox.

    How to Choose a Suitable Gearbox

    Choosing a suitable gearbox requires consideration of several factors, including load requirements, ratio selection, type of gearbox, environmental factors, maintenance, and durability.

    1. Load Requirements: The gearbox should be selected based on the load requirements of the application. This includes the weight of the vehicle, the torque output of the engine, and the maximum speed of the vehicle.

    2. Ratio Selection: The gearbox should be selected based on the desired gear ratio. This includes the number of gears and the gear ratios of each gear.

    3. Type of Gearbox: The type of gearbox should be selected based on the driving conditions and the vehicle’s purpose.

    4. Environmental Factors: The gearbox should be selected based on the environmental factors, such as temperature, humidity, and vibration.

    5. Maintenance and Durability: The gearbox should be selected based on its maintenance requirements and durability.

    Conclusion

    In conclusion, the gearbox is an essential component in various industries, and its performance characteristics, types, materials, and applications make it a vital part of many vehicles and machines. The future development trends and opportunities in the gearbox industry are promising, and choosing a suitable gearbox requires careful consideration of several factors.

China Good quality Agricultural Lawn Mower Silage Machine Mounted Cutterbar Disc Mower Gearbox air compressor CHINAMFG freight

High-Quality Agricultural Lawn Mower Silage Machine Mounted Cutterbar Disc Mower Gearbox and Air Compressor from CHINAMFG Freight

Our mounted disc lawn mower cutterbar gearbox is a highly efficient and durable product that is perfect for harvesting alfalfa, safflower, and other crops. Designed with European and American concepts in mind, this product is powered through the tractor, with the transmission main gearbox driving the cylindrical gear to the cutter head. The full gear structure design of the cutter beam and the low transmission noise make this product a reliable choice for farmers and agricultural professionals.

We offer cutter beam models with 4, 5, 6, 7, or 8 discs, and the working width can range from 1.65 to 3.2 meters to adapt to different needs. The KLF-GC165 is a rear-mounted edge holder that drives the flattening rubber roller, allowing for lawn mowing and flattening functions. Flattening the stems helps to absorb water and spread them out for drying, making it a great addition to any farm or agricultural operation.

Product Parameters

– Model: KLF-GC/KLF-GC165
– Cutter beam models available: 4, 5, 6, 7, or 8 discs
– Working width: 1.65 to 3.2 meters
– Output speed: 3000 rpm
– Rear-mounted edge holder: KLF-GC165

Detailed Photos

[Insert photos here]

Frequently Asked Questions (FAQs)

1. What crops is the mounted disc lawn mower cutterbar gearbox suitable for harvesting?

The mounted disc lawn mower cutterbar gearbox is suitable for harvesting alfalfa, safflower, and other crops.

2. What are the available cutter beam models?

We offer cutter beam models with 4, 5, 6, 7, or 8 discs.

3. What is the working width of the cutter beam?

The working width of the cutter beam ranges from 1.65 to 3.2 meters.

4. What is the output speed of the mounted disc lawn mower cutterbar gearbox?

The output speed of the mounted disc lawn mower cutterbar gearbox is 3000 rpm.

5. What is the function of the KLF-GC165 rear-mounted edge holder?

The KLF-GC165 is a rear-mounted edge holder that drives the flattening rubber roller, allowing for lawn mowing and flattening functions. Flattening the stems helps to absorb water and spread them out for drying.

In addition to our mounted disc lawn mower cutterbar gearbox, CHINAMFG Freight also offers a variety of other high-quality products for industrial use. From agricultural gearboxes and power output shafts to sprockets, fluid couplings, worm gear reducers, gears and racks, roller chains, pulleys, planetary gearboxes, timing pulleys, bushings, and more, we are committed to providing our customers with top-notch products at preferential prices with considerate services. We welcome custom orders and can work with you to customize drawings and samples to meet your specific needs.

All the content of this page is from the Internet. The content is only for reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks of the content. Our products are only suitable for after-sales replacement parts and not original spare parts. Our replacement parts can be perfectly adapted to the original spare parts. If you need to buy original spare parts, please contact the original factory to buy.

Introduction

Gearbox, also known as transmission, is an essential component that plays a significant role in transmitting power from the engine to the wheels in a vehicle. The performance characteristics of the gearbox are as follows:

1. Transmission Efficiency: The gearbox has high transmission efficiency, which can ensure that the engine’s power is transmitted to the wheels in a more efficient way.

2. Torque Multiplier: The gearbox can also act as a torque multiplier, which can increase the torque output of the engine to the wheels.

3. Gear Ratio: The gearbox can change the gear ratio, which can provide a wide range of speeds for the vehicle.

Types and Characteristics of Gearbox

There are several types of gearbox, including manual, automatic, continuously variable, and dual-clutch gearbox. Each type has its unique characteristics that suit different driving conditions.

1. Manual Gearbox: This type of gearbox requires the driver to change the gear manually. It is simple, reliable, and cost-effective, making it popular in many vehicles.

2. Automatic Gearbox: This type of gearbox can change gears automatically, making it more convenient for drivers. It is also suitable for reducing fuel consumption and improving driving comfort.

3. Continuously Variable Gearbox: This type of gearbox can continuously change the gear ratio, making it more fuel-efficient and smoother in operation.

4. Dual-Clutch Gearbox: This type of gearbox has two clutches, which can provide quick gear changes and improve driving dynamics.

Advantages of Gearbox Made of Different Materials

The gearbox can be made of various materials, including aluminum alloy, cast iron, steel, and magnesium alloy. Each material has its advantages and disadvantages.

1. Aluminum Alloy: This material is lightweight, which can reduce the overall weight of the vehicle and improve fuel efficiency.

2. Cast Iron: This material is durable and can withstand high loads, making it suitable for heavy-duty applications.

3. Steel: This material is strong and can resist wear and tear, making it suitable for high-speed applications.

4. Magnesium Alloy: This material is lightweight and has good heat dissipation, making it suitable for high-performance applications.

Application of Gearbox

The gearbox is widely used in various industries, including the automotive industry, industrial machinery, agricultural equipment, wind turbines, marine applications, and many others. Its use reflects its value and importance in various fields.

Future Development Trends and Opportunities

The gearbox industry is continuously evolving, and there are many development trends and opportunities in the market. Some of these trends include:

1. Lightweight and Compact Design: The demand for lightweight and compact gearbox design is growing due to the need for more fuel-efficient vehicles.

2. Electrification: As more vehicles become electrified, there is a growing demand for electric gearbox systems that can handle higher torque loads.

3. Advanced Materials: The use of advanced materials, such as carbon fiber, can improve the strength and durability of the gearbox.

How to Choose a Suitable Gearbox

Choosing a suitable gearbox requires consideration of several factors, including load requirements, ratio selection, type of gearbox, environmental factors, maintenance, and durability.

1. Load Requirements: The gearbox should be selected based on the load requirements of the application. This includes the weight of the vehicle, the torque output of the engine, and the maximum speed of the vehicle.

2. Ratio Selection: The gearbox should be selected based on the desired gear ratio. This includes the number of gears and the gear ratios of each gear.

3. Type of Gearbox: The type of gearbox should be selected based on the driving conditions and the vehicle’s purpose.

4. Environmental Factors: The gearbox should be selected based on the environmental factors, such as temperature, humidity, and vibration.

5. Maintenance and Durability: The gearbox should be selected based on its maintenance requirements and durability.

Conclusion

In conclusion, the gearbox is an essential component in various industries, and its performance characteristics, types, materials, and applications make it a vital part of many vehicles and machines. The future development trends and opportunities in the gearbox industry are promising, and choosing a suitable gearbox requires careful consideration of several factors.